Steeel Panel / Box Angle Forming CNC Corner Former Machine Bending
90 Degree Angle
Usually for processing door corner, should cut off four corners of
the sheet first, bend four
edges, welding the corners and grinding them then, the work wastes
time, hard to dio and
pollute environment. our cover forming machine molds and different
thickness and different
size door corner can be made.
cutt off corner of sheet metal is o longer needed. just pre-bending
the sheet and put it into
corner froming machine then the corner can be made. thew corner and
sheet are in solid
body and welding and polishing process is no longer needed. any
size of door corner can
be made. the corner is smooth, good look and good rigidity.
Performance of corner forming machine:
The CNC corner molding machine improves more than three times. So
enterprises do not have
to worry about recruitment. The whole machine power is 3.5KW when
the hydraulic system works,
but the welder power is 16.2KW, saving nearly 4.6 times. Save wire,
carbon dioxide (or argon),
grinding, protective equipment using costs. 300 days in accordance
with the year and daily work
six hours, a workers can produce 108, 000 workpieces by using the
machine model, but two
traditional craft Branch can produce 36, 000 workpieces. You can
get more than 3 times profit
Technical Features
The forming and shearing is finished separately in two working
position ；
Install safety light curtain protection to make the production
process more safe and humanistic；
The accuracy of different thickness is controlled by Fuji servo
motors;
Parameters is adjusted through touch screen, some other movement is
controlled by Mitsubishi PLC.A set of mould is with the machine
,including :rolling mould ,square mould ,shear knife of a corner
radius.
Adopt the imported first-class brand components as our key
electrical components to ensure the reliability and stability of
the system.
The PLC controller with 68 points can store and save lots of sheet
metal corner moulding technologies, gap compensation coefficients
.At the same time ,it can save and rewrite the coefficients of
special materials and even the complex bimetal at any time
This machine improves work efficiency more than three times by
changing the tedious process of open-angle welding ,grinding etc
into rolling ,stretching and forming directly .it saves labor
,electricity ,gas ,grinding material and other accessories for
enterprises, therefore ,it is both environmentally friendly and
greatly reduces the production cost , could be regarded as the
enterprise save-money expert.
Parameters:
technical parameters | Content |
Model | BH-1-3 |
Processing Range
(mm) | Material | Thickness | Flange height
(mm) | Corner radius |
Cold-rolled plate | 0.6 | <10 | 1.5-50 |
0.8-1.2 | <20 | 1.5-50 |
1.5 | <25 | 1.5-50 |
2.0-3.0 | <30 | 1.5-50 |
304(higher level included)Stainless steel plate | 0.5-2.5 | 1-2mm lower than the flange height of the cold rolled plate | 1.5-50 |
Aluminum plate | 1-3 | Same as the flange height of cold rolled plate | 1.5-50 |
Processing time moulding one corner | About 9 sec. |
Processing time moulding fours corners | About 60 sec. |
Mould configuration | Rolling mould ,square mould ,shear knife |
AC servo motor | Fuji/Japan |
Pneumatic System | Airtac/Taiwan |
PLC | FATEK/Taiwan |
Low voltage electrical appliance | Schneider /France |
hydraulic valve | Huade/China |
Main motor power(KW) | 4 |
Dimensions(Length×Width×height) (mm) | 1560*1330*1600 |
Weight(KGS) | 1260 |
