Fiber Laser Cutting Tube Machine High Efficiency Fiber Laser Generator Cutting 6m Tube Machine 1500W

1. It can cut multiple cylindrical intersecting line holes of different directions and different diameters on the main pipe to meet the conditions of eccentric and non-eccentric perpendicular intersection between the branch pipe axis and the main pipe axis.
2. It can cut the end of the cylindrical intersecting line at the end of the branch pipe to meet the conditions that the branch pipe axis and the main pipe axis eccentrically and non-eccentrically intersect perpendicularly and obliquely.
3. Ability to cut the oblique end face at the end of the round pipe.
4. It is possible to cut and weld elbows on round pipes, with obliquely truncated sections at both ends of the "shrimp section".
5. It can cut the end of the branch pipe intersecting line that intersects with the ring main pipe. To
6. It can cut variable-angle groove surface.
7. It can cut square holes and waist-shaped holes on round pipes. To
8. The steel pipe can be cut off.
9. Various graphics on the surface of the square tube.

1. Standard Raycus fiber laser (German IPG and other brands are also available), low operation and maintenance cost, realizing long-term return on investment and maximizing profit.
2. The two-dimensional movement of the worktable ensures excellent laser output beam quality.
3. X-Y working platform dedicated for cutting, servo drive, ball screw and guide rail drive.
4. The special control software with friendly interface facilitates the editing and modification of the cutting path.
5. Compatible with special cutting software such as AutoCAD and CorelDRAW.
6. Modify the processing program in the software at will to achieve the ideal cutting graphics.

Parameters:

Feature1

A.Super high speed laser cutter!
B. Compared with the universal laser cutting machine, The cutting speed is30% higher!
C. Machine acceleration up to 1.5G.

Feature2

A.Multifunction cutting for round, square, rectangle and oval pipes!
B. It can straight cut, angle cut, make holes, etc.
C. Smooth and burr-free cutting.
D. Cutting loss 0.1mm/cut only.
E. Excellent cutting accuracy ±1mm.

Feature3

A. Full pneumatic chuck, professional pipe cutting
B. The chuck adopts a four-jaw hollow rotary pneumatic chuck, its speed can reach more than 150 revolutions.
C. Fast clamping response time to protect and avoid pinching the pipe.
D. Different specifications need to replace the corresponding specifications of the chuck, the replacement time is 3 minutes.

Feature 4

Fully automatic loading system
The tubes will be automatically aligned in the loader. The transmission will load up the tube in turn from storage area to
alignment area. The limiting device in the alignment area will keep the tubes in correct order. If you need to change to cut tubes with different OD, please use the hand wheel to adjust the height of limiting.

7*24 Hours Service
YUAN has an excellent after-sales service team to ensure the after-sales problems are solved in time.

Full-stack Supplier
Focus on metal sheet processing machinery, and YUAN can offer all sheet metal machines for you.

Reasonable Price
High-performance price ratio is what YUAN will endeavor to achieve and it is gradually accepted by most customers.